Alexander A.Shpilman ( sah@nursat.kz )

Russian | Italiano

The Generator of "Axion (Spin) Field"

"COMFORT-M5"

(continuation, beginning in N1/00)

Fig.1

The generator COMFORT - M is a source of "axion field" sort 3 (see "Ring Structures of "Axion Fields"").

It is possible to add to it the "axion field" sort 4, using a principle of splitting the "axion field" sort 3 with the help of a difference of electrical potentials how it is described in "Separation Axion (Spin) Field" (see in article of a fig.3- fig.5).

For this purpose the capacitors closed in a ring are formed on perimeter of the reflector 3. Internal capacitor plate is the reflector 3. External capacitor is the aluminium metallized coat 11 of a dielectric polyethylene terephthalate film.

The positive voltage (contact E) moves on an aluminium metallized coat 11 concerning a reflector 3. This voltage is sufficient for splitting on components the "axion field" sort 3. In result the "axion field" sort 4 is formed which is closed inside the generator around of a ferrite ring in toroidal structure. And interference strats similar to described in "The Generator of the "Axion Field " Sort 5" occur in a beam of the generator, but these srtats have toroidal structure..

Such generator (COMFORT - M5) with the "axion field" sort 5 has considerably more dense beam with new quality.

 

The beam of the generator has complex structure consisting of several extended, enclosed toroidal structures of the "axion field". The toroidal structures 1 (Fig. 2) and 2 (Fig. 3) are most intensive and extended to 1.5-2.5 meters. The toroidal structures 3 (Fig. 4) and 4 (Fig. 4) are much less intensive.

Some "trivial details"

Рис.6

The real designs of generators contain set of constructive "trivial details" which are difficult for enumerating.

In a Fig.6 the contents of the head of the generator are shown. The ferrite ringlet 2 on an axis 1, silver reflector 3, toroidal coils 6 and 9, the iron case/shield 7 are a real view of elements shown on a Fig.1.

In a Fig.6 it is visible, that the grid 10 is made from a silver tape which is put on an edge. The iron case 7 has a fillet 17 (Fig.1). And it is not just good looking, it is functional. A fillet reduces radiation of the field in the direction of the hands of an operator and improves focusing of the generated beam (see Fig.5). Silver cap 14 (Fig.1) also is intended for improvement focusing of a beam..

In the head of the generator for additional reduction the radiation of the field in the direction of the hands of an operator an electret film 16 (see Shielding packing) and a copper disk 15 (Fig.1) are used. This disk is tinned by a Rose alloy.

Fig.7

The vertical strips of covering bismuth are put on the perimeter of the ferrite ring 2. Their width and interval is 1 mm. This covering improves quality of the generated beam (in the relation to a man).

Inside the ferrite ring 2 on an axis 1 (Fig.1) thin iron tube 13 is placed. It increases uniformity of vector potential inside the ferrite ring 2, increases density and stabilises the generated beam of "axion field " of toroidal structures 1 (Fig.3).

The ferrite ring 2 is charged by DS-state (M-state) elements (see Time - Overtime) in concentrators described in - ""M-state" Elements Concentrators" or in a "place of power" (see A Place of POWER). Or the generator is charged directly in a "place of power" as shown in a Fig.7. Thus the only beam of the "axion field " is directed in a place with the maximal intensity of "geofield". But the generator is located outside of a point with the maximal intensity of "geofield". This is necessary for a charge only a radiating part of the construction of the generator and for reduction of a charge of all case of the generator.

Translation of M.Dvoretskaya

Thematic Contents

CONTENTS